Do you require inbound services (DID, Toll Free)?  Visit: www.ipcomms.net

X-Lite Configuration Instructions

STEP 2: Download the Softphone here and follow the prompts from the install wizard. Click Finish to complete the installation.

STEP 2:  Launch the softphone and wait for a window to pop up with your "SIP Accounts"  and click the add button

STEP 3:  Next the "Properties of Account 1" window will pop up. Place the following information there:

1.      Display Name : Any name you wish to place here

2.      User Name : Enter the ‘Username’ we sent you via your Sign Up confirmation email

3.      Password : Type the password we assigned you on your Sign up confirmation email

4.      Authorization user name : Enter the ‘Username’ we sent you via your Sign Up confirmation email

5.      Domain: Enter the following domain name  " sip.talkinip.net"

Troubleshooting

If you get one-way audio, or cannot register you are probably behind NAT or firewall is enabled on your PC. Disable firewall on your PC and make the following changes.

- Go to  "Sip Account Settings.." on the softphone then go to properties

- Click on "Topology" tab and choose "Use local IP address" under "IP Address"

- Click "Enable ICE" option and then click on "OK" button.

Restart the application and try making calls again.

ZoIPer Configuration Instructions

STEP 1: Download the Softphone here and follow the prompts from the install wizard. Click Finish to complete the installation.

STEP 2:  Launch the softphone and wait for the main window to pop up.

STEP 3:  Right click anywhere on the main window and click options.

STEP 4: Click Add new Sip account

STEP 5: Enter your name in the pop up window and click OK

STEP 6:  Next the "SIP Account Options" window will pop up. Place the following information there :

1.      Domain: Enter the following domain name " sip.talkinip.net"

2.      User Name : Enter the ‘Username’ we sent you via your Sign Up confirmation email

3.      Password : Type the password we assigned you on your Sign up confirmation email

4.      Caller ID Name : Enter the ‘Username’ we sent you via your Sign Up confirmation email

STEP 7: 

Click Ok

Make SIP Calls with your Windows Mobile PDA or Phone

fring leverages the internet connectivity traditionally used for mobile email retrieval and web browsing to provide mobile VoIP communications so you can talk and instant message for free! fring allows you to make calls over the Internet using any windows mobile phone.

Using FreePBX

Using Config Edit

############################################################################################################################

Below is a configuration examples for the open source PBX AsteriskTM. These examples may vary depending on your software
versions, implementation type, and more.  These are examples taken from our most common customer configurations.

############################################################################################################################
____________________________________________________________________________________________________________________________

TalkinIP GUI Trunk Setup Entry

Trunk Settings

[***enter username***]

username=***enter username***
type=peer
secret=***enter secret***
nat=yes
insecure=very
host=sip.talkinip.net
fromuser=***enter username***
dtmfmode=rfc2833
canreinvite=no
allow=ulaw

Registration Statement
register=username:password@sip.talkinip.net/username

________________________________________________________________________________________________________________________

What do I do if my asterisk server has a private IP Address?

Please enter the following two settings (externip and localnet) at the top of your sip.conf file in the general section.  
If public, nothing needs to be added to the general section.  Depending on your setup, you might need to forward all ports 
to your Asterisk server's private IP address or put the private IP address of the Asterisk server on the DMZ.

externip=WAN IP address
localnet=192.168.1.0/255.255.255.0 (or whatever your private LAN is configured for)

Cisco IP Phone 7940 / 7960 VoIP settings & configuration

Prior to use, the Cisco IP Phone must be SIP enabled.  You can check this by verifying that the correct SIP firmware is installed. Check this by verifying that a SIP logo is in the upper right corner of the Cisco IP Phone's display. This option must be obtained by contacting Cisco.